Tips and Trick to Keep Your CPU Cool

Cooling down your PC

Having a CPU also means that you also have to install the CPU cooler. First, you must make sure that you install it, but you also have to make sure that you install it correctly. If you happen to install it incorrectly, your processor will get hot in a short time and the end will shut down the computer due to overheating. But how to do it? Here you will be given tips and tricks on how to correctly install the CPU cooler to keep CPU cool.

Check the Thermal Paste
The first tip if you want to keep CPU cool is that you must check on the thermal paste. Between the CPU lid and the base of the CPU cooler, there will be a layer of thermal compound. Thermal paste has been applied in some coolers. However, some have not, so you must check the bottom part of the cooler. If your cooler has no thermal paste, you should put a tiny amount of it on top in the center of the CPU lid.
 

Setting up standoffs or bracket
Extra installation may be needed for the cooler. Either the standoffs or a bracket behind the motherboard, you must check which one is suitable for the cooler and your job id to attach them. In the water cooler, you must attach the radiator to the case.

Lining up the CPU cooler
To install the cooler you must line up the connector towards the CPU with holes found in the motherboard or the standoffs. After that you lower your cooler to your CPU.
 

Attaching the cooler

After you put the cooler in place now it is time to push in the connectors. If the connectors are screws you should tighten the screw loosely at first and increase the tightness slowly until they tight enough. Try not to go in a square to the CPU because uneven pressure can be created across your processor and can also impact the cooling.
 

Attaching fans and plugging in
The next step is to attach the fans. You can see how to attach the fan to the cooler in the manual because one is different from another. If a water cooler is used then you must connect the radiator, coolant reservoirs, and the water pump.

If everything has been attached, check if they all have power. Once attached and powered your cooler is ready to be used. Making sure every step is done properly you will be able to keep CPU cool.

loading...

How to Install PWA Microsoft Office Online

After the previous Microsoft Outlook email application was available as PWA (Progressive Web App), now finally Microsoft has also made Microsoft Office applications as PWA as well. By offering this feature to Microsoft Online users, it will certainly make it easier for them to access and use it.

PWA or abbreviation of the Progressive Web App is an application in the form of a web app that behaves like a real application. In the process, this web app will be hosting directly to related websites. In short, you can use a website like using the application. For example, you can use the Google Maps application in your favorite browser just like using it in an application on Android or iOS. All features are limited if used in a browser, you will not find it when using this PWA mode because it really feels like using the application directly. So, if you are accustomed to manually accessing these sites through a browser, then through this you can simply click on Shortcut on your device's desktop, and later the application will immediately open like other native applications on your device.

For that, if you are starting to wonder how to install this Microsoft Office PWA online to your device, see the tutorial below.

    Open the official Microsoft Online site. Then log in with the account that you use when you use other online Office applications such as Word, Excel, or PowerPoint.
    After that, select what applications you want to make as PWA. Just click the application to display the dashboard display before using the application.
    Once in the dashboard, then you select the settings option in the browser, then select the Apps option.
    There will be an option to install the official application that you wanted it to be. After that select, the option then writes the name of the application to your liking.
    Done. After that, you will be able to see the PWA application on your device's desktop. To use it, you just need to click on it, and the application will open immediately.

Unfortunately, this only applies to Edge Chromium browsers only. For other browsers like Firefox, Chrome, it might still not get support, so just wait in the future.

For information, even though we can already install it on the device, it does not mean it can be used offline. Because it was from the start an online Microsoft Office, so to use it must also be online.

loading...

Easy Way to Operating a Copy Machine

Ricoh MP C5503 5503 Copy Machine

BUY NOW

Do you ever see a copy machine or photocopier? If you have already seen it, then can you operate it? If you can’t, don’t worry because here you will know how to use a copy machine in an easy way.

What is the Copy Machine?

First of all, we need to say thank you to Chester Carlson who invented a photocopier. This machine requires electricity and also photoconductivity in order to be operated. It can copy visual images and of course, documents onto plastic film or paper. It can also be connected to a PC or computer, so you can print your file right away. What’s more? It can be used as a scanner. Let’s move on to how to use a copy machine.

How to Operate a Copy Machine?

You need to make sure that the power is on. Usually, the power button will be on top or the side. Ensure there are papers in it or add some papers if you see the level is already low. Put the paper needs to be copied on the copier. Facing down the side of the paper that wants to be copied to the glass and close the cover of the copier. There will a selection of the quantity and also plus and minus buttons to make you able to copy how much papers needed. There will be also the buttons to let you decide whether you want it a colored or black and white color. After that, select the paper size. The last step is pressing the copy button.

How does It Work?

You must be familiar with these components if you want to know anything about copiers. There are a halogen lamp, photosensitive drum, toner, and a conveyor belt. Halogen lamp will scan the document and it can be reflected a photosensitive drum. The sensitive drum or a metal roller is charged by a corona wire and coated with selenium. It remains negatively charged when it doesn’t expose to any light while the toner is vice versa. The drum will rotate and carries electrical shadow to the toner. The paper will move along on the conveyor belt and it will carry the positive particle. When the paper wants to come out, it will pass the hot roller and it functioned to fuse the toner particle.

If you look at the machine at a glance, maybe you will feel that this machine is difficult to operate, but what now? You have already known how to use a copy machine and can help others to copy their documents right away.

loading...